window question

ahardb0dy · Nov 16th, 2004, 10:35 PM

90 sentra 2 door, when I roll up my driver side window it hits the little block of rubber that I guess is supposed to guide it into the weatherstripping, and if I'm driving over 35MPH the window won't go into the center of the weatherstripping it will fold the rubber over and push it up into the window track, I have to roll the pass. side window down slightly in order for the drivers side to go in the middle of the track without pushing the rubber. Is there any kind of adjustment that I can do to move the window in slightly? Also what kind of adhesive is used to attach the plastic that holds the window to the regulator on the bottom of the glass?

Crazy-Mart · Nov 17th, 2004, 03:57 AM

the glue used is epoxy.. as for ajusting it... unless you change the guides on each side the only thing i can thik of would be the alignment of the window mecanism.. check to see that its holding tight on the door frame it self ... it might only be a few pop-rivets that gone wrong.. or the door frame itself is really damaged...

B11sleeper · Nov 17th, 2004, 01:37 PM

I was having problems like this with the window on my datsun, I took the rubber out of the window frame to paint and when it put it back together, the window now works perfectly, check and see if the rubber inside the door fell out of the track.

ahardb0dy · Nov 17th, 2004, 04:43 PM

The rubber that was in the frame was perm. folded over, I just replaced it with one from a junk yard car that was in good shape, so I don't think it has to do with the rubber, guess I'll have to pull the door panel again to check everything out, thanks

B11sleeper · Nov 17th, 2004, 05:10 PM

Quote:

Originally Posted by ahardb0dy

The rubber that was in the frame was perm. folded over, I just replaced it with one from a junk yard car that was in good shape, so I don't think it has to do with the rubber, guess I'll have to pull the door panel again to check everything out, thanks

i didn't even have to pull my door apart. but on yours i dunno...

ahardb0dy · Nov 17th, 2004, 05:40 PM

I didn't pull the panel to remove the rubber either, installing the weather- stripping was giving me a hard time so I pulled the panel ( Also had Dynamat to install around my speaker anyway), I was saying I may pull the panel to check the window mechanism,