Hey guys. I was just wonderin if the flywheel and/or the underdrive crank pulley from the B13 motor will fit on the 89-90 motor? Same block but I don't know if they will fit for sure.
only difference is the intake manifolds... tranny and crank stuff should be no problem... but if you have your doubts, you can always call nissan and inquire about the exact parts numbers...
__________________ Bigbigcar.com
My new hobby... driving.
Ford Lynx RS / Mazda Protege MP3: Slow but Furious out of the box. :D
Originally posted by racecargo11 are the exhaust hedders the same because they sell aftermarket performance headers for the 91 b-13
my guess would be that they're just shaped differently
__________________ Student at UTI Avondale 2nd place SkillsUSA/VICA WA State Automotive Maintenence '04 had an 87 pulsar...still planning CA20DET
1970 Chevy BelAir 350V8 300hp...soon to get M21
not similar... they must be the same. If they're similar, you might have to do some modifying... but I'm pretty sure it's okay. Just make sure the engines are both GA16.
__________________ Bigbigcar.com
My new hobby... driving.
Ford Lynx RS / Mazda Protege MP3: Slow but Furious out of the box. :D
oh in case anyone here cares unorthodox racing is having a clearance on some pulleys for the sentra/200sx and the 240sx. i just visited the site today and there is a bunch of discontinued stuff.
Originally posted by Silvia1320 oh in case anyone here cares unorthodox racing is having a clearance on some pulleys for the sentra/200sx and the 240sx. i just visited the site today and there is a bunch of discontinued stuff.
great deal too, $124 + shipping (cuz they're discontinued - the GA16DE pulleys)
the pulleys should be fine as long as:
a)They are capable of withstanding the force exerted on them (UR makes good pulleys no problems there)
b) they mount the same (bolt up etc).
Mike Kojima did an excellent write up about the UR pulleys. It can be found here:
Linear Mode
