Fuel delivery Problem HELP!!!!

Dropped89 · Jun 26th, 2003, 03:59 PM

ok , So my car runs, If you pour Gas in the TB but somthing is not alowing the Fuel to get through. here is what I have done to solve the Problem:

1. Checked Fues box.
Result= fuse good

2. Checked presure in the fuel line b4 and after the fuel filter.
Result= Gasoline all over my face . Presure was good!

3. Tested the injector and the Voltage getting to the Injector.
Result= Injector good and getting power.

4. Changed the TB to one known to be working.
Result: nothing

I need help and more brain storms on how to solve this problem.

thnks

Crazy-Mart · Jun 27th, 2003, 12:41 AM

crank angle sensor !!

check for signal at the plug... if the ecu doesnt sens cranking, it doesnt fire the injector

Dropped89 · Jun 27th, 2003, 10:33 AM

the crank angle sensor is in the distributer , so I check the plug thats on the distruber right?

finaly you are the only person with a new idea lol I will check that today.

Crazy-Mart · Jun 27th, 2003, 10:47 AM

ya it is the plug you have to check... maybe the connection is corroded... can be a bad groung to it too....

between 2 of the wires there whill be continuity when it its 0 and 180 degree... not sure wich one....