Need help finishing sr20de swap in b12

dc588 · Mar 23rd, 2008, 10:12 AM

I have a 89 Nissan Sentra 2 Dr. I bought the car with the SR20de Swap in it. It starts up, running w/ issues. The car shakes when you drive it and shakes even harder when driven at higher speed.

Anyone have ideas of who can fix this problem or where I can take the car to. I live in Miramar, FL. Please email me at dchatoori@bellsouth.net I am also looking for the rear center light that says SUNNY, JDM grill and both JDM bumpers.

Thanks.

greenbean699 · Mar 23rd, 2008, 09:56 PM

we need more info, what shakes? is it related to the swap or just suspension problems?

dc588 · Mar 24th, 2008, 05:08 PM

I'm not to sure what causing the problem. I tried trouble shooting this issue. First thing I did was put the car on jack stand then put in gear while running. As soon as the the gas pedal is hit, the whole motor, gear box, suspension starts to shaking.When driving and turning left shaking stops.I will be posting pictures and maybe you'll see something that I'm missing.
Thank you for your respond

BeyondBiscuits2 · Mar 24th, 2008, 06:23 PM

Sounds like you are missing an engine mount, or your engine mounts are faulty.

dc588 · Mar 25th, 2008, 07:50 PM

how you post pic's ?

BeyondBiscuits2 · Mar 25th, 2008, 08:38 PM

Upload the files to a host like Photobucket, and then copy the URL code they give you. That's the easiest way.

greenbean699 · Mar 26th, 2008, 10:56 AM

it sounds like what my 89 was doing after a year i swapped a 92 ga16de into it. the bearings inside the tranny were wore out, the 92 was hit in the drivers side front. it broke a axle, but i dint think it had done any internal damage, i guess i was wrong. i have yet to replace the tranny. this could be whats happening to yours

ghost64 · Mar 26th, 2008, 03:08 PM

sounds similar to my Geo Tracker.. I have a bent motor mount and it shakes just like described.

Check them all out, and if they need replaced, I hear those poly ones work out really good.