Re-mounting Passenger Door

sentrastud · Jan 14th, 2006, 06:47 PM

Well,
My passenger door has sagged to the point where the inside latch can no longer open the door. I did a search and saw a thread or 2 where it was suggested to remount the door.

With the passenger door open it has about a 1cm of verticle play. How exactly do you remount the door to correct the problem? Do i just need to reseat the hinge on the frame? Or is the problem with the door pins? (ie what is the part the fails here??)

Any help would be appreciated.

-Nick

4pt9fiero · Jan 14th, 2006, 08:27 PM

You need to go to the Stealership and get new pins and bushings. They cost about $20 US per door it will make all the difference in the world. Before I did mine I had to lift the door to get it to close, after I replaced them the doors work so smooth.

Do a search, when I did mine a few months ago I posted the part numbers you need when you go to the dealer. (At least for mine, 89 sentra)

Good luck

sentrastud · Jan 15th, 2006, 12:24 AM

cool thanks, when I just searched door pins and bushings I found your old post. Thanks for the info!

-Nick