|
The only special tool u need is a 2 jaw puller for when u disconnect the tie rod end from the steering knuckle arm. The other way u can do it is, by simply removing the 2 nuts that connect the strut and the steering knuckle. then pull the knuckle back and towards the tie rod end and now all u have to do is take the pin off, and loosen the tie rod nut. Make sure u mark the position of the tie rod end in relation to the threads.
__________________
Sobre un urinario decia:Un consejo de amigo,un consejo de hermano,que nunca tengas en el culo,lo que ahora tienes en la mano.
|