Quote:
|
Originally Posted by copperlite
okay, i drained the tranny and i got the driver's side shaft completely out and on the bench.....now what??? I pounded at the outter joint a lil bit but it's not budging! Do i need to take the "circlip"? off or what? BTW where's the fill hole for the 5-speed located, the transmission in the book looks totally different from mine. Thanks!
|
Ok if you have a vice , great. Is what you need to do is anchore the axle (shaft) ,next grab on to the outer c.v. joint with on hand and pull like hell while striking the rear of the c.v joint with a fairly large hammer and fairly hard.You want to strike the joint perpendicular to the shaft.Right on top of the "bell"
What Im trying to say is with everthing lined up in a strait line and you pulling on the joint just strike the top of the joint, dont be affraid of it
Hope this helps