Quote:
|
Originally Posted by trucksR4girls
My main problem is the 'plate' (I'm not sure what its called, but it is the main part of the puller in which the bolts pass through) does not fit flush onto the pulley. The diameter of the puller is a bit smaller and does not allow for proper fitting of the puller 'plate'.
|
I guess I'm confused since that plate does not touch the pulley in any way. The only parts that touch are the large bolt that fits through the middle of the puller plate and the two bolts that connect to the harmonic balancer face. The large bolt should be centered and as you tighten that it pushes the plate outwards which pulls the 2 bolts which pull the harmonic balancer off.