Originally Posted by nbkoontz

This is how I programmed my remote. I would recommend that you do the same:

1. Get in the car and close and lock all doors.

2. Put the key in the ignition and remove it completely 6 times in 10 seconds. If done correctly, your flashers will blink once and you will enter programming mode. Turn the key to accessories mode and press any button on your remote within 5 seconds. The flashers should illuminate again briefly.

3. Turn the ignition off and remove the key.

4. Unlock and open the door. Exit the car and shut the door.

5. Try your remote out. It worked flawlessly for me!