Quote:
|
Originally Posted by SVP5TEN
finally got the front stablizer bar. now with the front and rear stablizers the car is very noticibly stiff. havnt had a chance to toss it through a few turns yet because of the weather. it just doesnt lean alot in the front like before so i know this was a good mod to start with. next on the list looks like 4 wheel disc and coilovers.
|
That is Xcellent, Nice clean Dyno Run also. Love the Immediate rise and slow tapper.
If you can, get an Underdrive Pulley on that engine. It will get you to the 160 mark.
I tested ( KA24DE ) 149 HP / 148 TQ on my Silforty with :
ASP Underdrive PULLEY
Flowmaster Tube(12") and 14" Oval inline with 2.5" DIA exhaust(and of course I have to have a CAT in so it is PDM racings mod CAT for the 240sx/Silvia)
NO Cooling FAN
Injen Full Cold Air Intake.
So I know you can squeeezzzze 7 More wheel Ponies out.
You have about 3-5HP in the Fuel Mixture also. It is almost Opposite of my A/F Readings. I need to enrich it from Idle to 3500 and leave it for the rest. I am doing that with HKS SAFRC.
As you know, a nice Hi volume fuel pump with regulator would work REAL well.
May have to make an adjustable pump up and clean the Venturi bodies.