Quote:
Originally posted by hybrid DET
when you finally get the stripped studs out and are ready to put in the new ones, put them in the hole, thread a lug nut on, and tighten it. This will pull the stud through the hole and in place. Since it is a tension fit, you will probably have to do it this way... I wouldnt suggest using a hammer to install the new ones.
|
Was I not clear enough?  j/k Doing it this way is the best AFAIK
Quote:
|
6. Draw the new ones through using a lug nut and a stack of washers on the front side. Place the washers on the stud, then a nut and tighten down untill the stud bottoms out on the back side. Using an impact gun makes it quicker and easier, but you can do it the old fashion way.
|
__________________
Patrick Scott
Yeah, thats a roll cage in there.
I shall call him...Mini-Me
|