|
If my memory is correct.
Its really simple. Once you pull the ECM out, which is right behind the radio console on the floor board, you should see a screw in the back left hand corner. Grab a flat head screwdriver and turn that screw completely clockwise, then wait about 2 seconds, then turn that screw completely counter-clockwise. Now look at the check engine light and it will be blinking. Count the number of flashes, there are two sets, first count the slow then the fast. Say ... 3 fast and 2 slow ... Now if you have a Chilton (Sp?) you can find what that code is by looking it up. Hope this helps even though its not your load. Plus im no expert, so I might not even be right. But it worked for me.
|