Quote:
|
Originally Posted by Gsolo
would i be able to take the complete brake system from the NX2000 and put on my 87 pulsar XE ?
|
Yes, but you would have to use 14" rims or bigger.
Quote:
|
Originally Posted by Gsolo
I know for the rear brakes i have to change hub, but front i take it would be ok. and i'm thinking if i'm basically using all brakes from nx2000 why not jsut use master cylinder and booster from it.
|
Why not? By using the entire system you wouldn't have to worry about proportioning for the fronts to rear. This is if you are going to rear disc. I don't know if there would have any effect on bigger fronts and stock drums in the rear.
Quote:
|
Originally Posted by Gsolo
dont really want abs and i believe abs still goes through the main ecu does it not?
|
The abs controller is not needed to run the bigger abs brakes. You can use the abs system (calipers, rotors, MC, booster) without wiring up the abs sensor etc. But to use this system I believe your rims would have to be 15" or larger. The abs controller is a seperate unit and isn't part of the ecu. Yet, the ecu helps to aid the abs system with signals from sensors.
I hope this helps.
Rocky