OK you made me get up and go outside and look at mine..
It is behind the EGR valve on the driverside on the inatke plenum. It is kinda above the EGR.
If looking at the brake master cylinder from the fender side. look up at the intake.
It is a typical Nissan Steel tube design that bolts to the intake with a 17mm wrench. the rubber hose goes back (firewall side) along behind the intake plenum to the passenger valve cover. right next to the oil filler cap.
I can take a pic tonight or tommorrow if you are not familiar what Nissan PCV valves look like...
It looks the same as all my other Nissans including my old 1974. I usually never replace them, just clean them. I have only had one break.
__________________
Barry
1993 King Cab SE 4wd- SAS, 35s 3link
1992 Pathfinder SE 4wd - SAS 33s 3link
http://nissannut.com
|
