NissanForums.com :: Nissan Forum - View Single Post - All you ever wanted to know about your Check Engine Light but were afraid to ask

Gollum · Sep 20th, 2003, 05:00 PM

I have a 2002 3.5 SE. My check engine light came on today for no apparent reason. I could not rev the car past 2,500 rpm. When I got home, I checked this post and went into the diag mode and got the error code.
It looks like it is 1102, though it was not easy to be sure of the first number. It definitely has those four digits though.

With the engine light on, the engine started a bit rough, but ran. When I cleared the light, the engine will now start but stalls within a few seconds.

I had an issue like this a while back, though not as bad. The car would not rev past 2500. The light was not on and the car drove fine after about 15 minutes. When I took it to the dealer, it turned out to be something very minor and I read on this forum that it was the engine computer blocking revs over 2500

So today, when this happened, I assumed the same (something minor with anoverreacting computer). Now my car will not run at all.
Any suggestions? It's Saturday night, I have no car and will probably have to tow it to the dealer on Monday!

ALso - where do I go to find out what my error code means??

Sep 20th, 2003, 05:00 PM	#70 (permalink)
Gollum Sorta-Newbie Join Date: Dec 2002 Posts: 13	MIL light on I have a 2002 3.5 SE. My check engine light came on today for no apparent reason. I could not rev the car past 2,500 rpm. When I got home, I checked this post and went into the diag mode and got the error code. It looks like it is 1102, though it was not easy to be sure of the first number. It definitely has those four digits though. With the engine light on, the engine started a bit rough, but ran. When I cleared the light, the engine will now start but stalls within a few seconds. I had an issue like this a while back, though not as bad. The car would not rev past 2500. The light was not on and the car drove fine after about 15 minutes. When I took it to the dealer, it turned out to be something very minor and I read on this forum that it was the engine computer blocking revs over 2500 So today, when this happened, I assumed the same (something minor with anoverreacting computer). Now my car will not run at all. Any suggestions? It's Saturday night, I have no car and will probably have to tow it to the dealer on Monday! ALso - where do I go to find out what my error code means??