Quote:
Originally posted by Sethticlees
Things are moving right along. Since my last post I've applied three coats of Cascade Audio VB-1 to the insides of both doors. This stuff is awesome. The only down side is letting it cure for 8 hours before you apply another coat. Plus, the car needs to be 70 degrees for the VB-1 to cure properly. This is why I would recommend doing this project in the summer. Depending on where you live of coarse. I live in Seattle, so not to many sunny days left.
My 100 sq ft of Dynamat Extreme arrived today!!!
This means I can finish up the doors sometime this week.
The only obstacle left to overcome is the mounting situation for the speakers...
The speakers are 6 1/2" and as we all know the door mounts for a 93’ Sentra is 6 3/4". This creates a problem when mounting a component set 6 1/2" mid-bass driver. The solution will have to be some sort of adapter that can mount the mid-bass driver and then mount to the vehicles existing speaker hole.
Can anybody tell me what they did to combat this problem?
I have a buddy working on some plans to custom build a set of inserts that adapt a 6 3/4" Nissan setup to a 6 1/2" speaker.
An easer route would be preferred.
More to come…
Seth
|
i think today was well over 70 around 11.00 here in fed way