Thread: sr20de problems
View Single Post
Old Aug 13th, 2003, 02:34 PM   #12 (permalink)
CarloSR
Nissan Enthusiast
 
CarloSR's Avatar
 
Join Date: Nov 2002
Location: Dominican Republic
Posts: 233
Re: sr20de problems

Quote:
Originally posted by evan717
i have a 95 200sx se-r with 109k and have been having problems with the common sputtering problems. i am real good with cars but i wanted to take it to my shop to plug the computer up and it came up the MAF was bad. They said it might be other problems and i might as well buy tune up parts for 100 bucks to see if its the problem rather than 500 on a new MAF, so i went to the local car parts store to buy some parts(wires,plugs,rotor,cap). The cap and rotor that were on the car were less than 6 months old and had deposites already. Nothing happened when i replaced these parts so i took it to nissan. They said they've never seen this before which i find hard to believe but also they said the parts that i just replaced were garbage and that the cap and rotor were bad again. They put on new wires, plugs, cap, and rotor and now it runs decent from 1k to like 4.5k but than it cops out and backfires and sputters. If i get it up to 6.5k very slowly, than there is no hesitation at all. PLEASE HELP. I'm going insane.
You got (or NISSAN) the wrong rotor or cap !!
Re-check the part #s.

Carlos.
__________________
2001 JDM Nissan Primera Turbo

My car pics
CarloSR is offline   Reply With Quote