NissanForums.com :: Nissan Forum - View Single Post

dankar · Aug 12th, 2003, 10:24 PM

There are a couple of tools you will need to pull the ac clutch. You also have to set the correct air gap no the new one. Autozone should have the tools to loan.
If you are going to continue to work on this car, I would get an FSM, they run around 50.00. It will be invaluable, unless you have time to thrash around on the internet for info.

You can continue to use R12, but you need to have guages to tell if you need to add more or not.
The 134a conversion is easy, but you would have to have someone remove the r12 with a vacumn pump.

Aug 12th, 2003, 10:24 PM	#4 (permalink)
dankar NissanForums Newbie Join Date: Jul 2003 Location: Franklin, Tn Posts: 5	ac problem There are a couple of tools you will need to pull the ac clutch. You also have to set the correct air gap no the new one. Autozone should have the tools to loan. If you are going to continue to work on this car, I would get an FSM, they run around 50.00. It will be invaluable, unless you have time to thrash around on the internet for info. You can continue to use R12, but you need to have guages to tell if you need to add more or not. The 134a conversion is easy, but you would have to have someone remove the r12 with a vacumn pump. Last edited by dankar : Aug 12th, 2003 at 10:28 PM.