Try doing a search. I have posted instructions for checking and adding your own ground to the fuel shut-off solenoid. If the solenoid closes while your car is idling, it will stall.
I checked for continuity between the 4 and 5 pins on my ECU ( thats where the chilton manual says to look for the fuel shut-off solenoid) and they didn't have continuity. I also have a problem, i don't have any wire's going to the driver side of the carburator like your post said, but i do have several plugs on the passenger side.
I have a list of all the harneses:
1. 2 wire harness on top of carb ; blue & black/red
2. 3 wire harness on big brass looking thing ; gray & red/black & red/white
3. 6 wire harness on front ( towards front of car ) ; white/green&whiteblue& 2 black wires and 2 white wires
4. 2 wire next to throtlle position sensor ; grenn/yellow&green/red.
Check the vacuum lines to the carb. Also make sure your dash pot is functioning.
Ok i know where the dash pot is now, but i was wondering if you could tell me how to check it and also what it does. When i am working on my car i like to know what i am messing with
.