|
Check and make sure you have the correct lines on the front and rear....On the P11 G20 the connections onto the hardline are different. The fronts are a M10 x 1.0 Concave fitting (the hardline looks like a swaged piece of tubing). The rears are an M10 X 1.0 Convex (Inverted Flare - the hardline looks like a flared piece of tubing) Fitting. If you put the wrong fitting on the wrong hardline, they will not make a good seal and will leak. Teflon tape helps, but shouldnt be necessary. IMO, yank off all the lines and start over. Clean off the threads and mating surfaces...this will help.
|