|
I have a 1987 VG30ET from a 300ZX. Its going to be a project for sure. The issues with this that I have found so far: the turbo is mounted where the driver side engine mount is plus the downpipe for the turbo is going to rub the steering shaft(or its going to be a very tight fit). Also the truck comes with the exhaust crossover pipes underneath the transmission, the 300Z has the crossover pipes over the transmission which places this in my fire wall on my truck. I figure getting a custom exhaust manafold made could fix all this (of course this could also fix my pocket too). Then you get into the electrical issues, to fix this I plan to use an aftermarket computer such as AEM or Haltech, I would probably do this anyway to get more power out of the motor along with a turbo upgrade (another ouch but oh well). The last issue that I know about is that I have to switch the fuel pump to a 300Z TT so I don't run too lean. I could have used a different engine swap but I already had this one. This project is going to take awhile but it should be fun when I am done with it. Thanks for the rear axle info.
|
