|
I personaly don't think Stillen is a rip off. They have the best headers (i've read) if you are looking for headers in the future.
As for a cold air intake, I would just make your own with parts from the good old Home Depot. It's much cheaper and it's fun putting togeather since you get to build it yourself. Just make sure you buy actual metal piping because you don't want to end up with a half assed air intake. You can get the metal piping at Home Depot and ask any muffler shop to mandrel bend it for you at any angle. All you really need is a straight piece and a 90 degree bent piece.
Your going to have to drill your own holes and make your own air inlets for your intake though.
So, I guess you can spend $250 for everthing you'll need pre-fabricated or build your own for less than $100.
|