|
To test your vent control valve you just disconnect it and put 12v power to it and see if it moves properly. Behind your driver side rear tire there is a charcoal canister. on the front of it is your vent control valve. It has 1 electrical connector and 1 hose going to it. To remove it there is just 2 10mm bolts. Now put to wires to the pins coming out of the control valve and put the wires to your car battery to see if it works right. Look into it and you will see a valve that should move when power goes to it. Chances are, you need a vent control valve. Up here in the north, they start to rust and cause the valve to not work. If you don't replace this you will notice your car will start running funny and may be hard to start. It is not uncommon for this to happen.
Hope this helps.
__________________
93 NX2000 w/sr20ve
98 Frontier
|
