|
I wanted to thank all that posted here. You guys saved me the $50 that my Nissan service department wanted to charge me to install the $1 and change bulb for my brake light. As mentioned, it was not easy. I don't know why they make it that hard. Anyway, the key for me was to have a telescoping magnet so the nuts did not disappear inside the panel. Also, tapping the studs alone was not enough. I had to shimmy near the back and make sure I pushed the side of the assembly straight back, no prying sideways. It took awhile but it finally came loose. You'll see why it doesn't slide back easy when it is off and you see that it is secured in 3 more places.
|
