Quote:
Originally Posted by internetautomart
the fans should go on if you unplug the coolant temp sensor.
Get a test light and check for voltage up and down the circuit.
|
Just got back to this, sorry for the delay. I found the problem. The connectors in the coolant temp sensor are badly corroded (green gunk). I tried cleaning them out with some electrical cleaner, but it didn't get the green corrosion out. I also tried picking the green gunk out with a dental pick... still can't get it all. Right now, I am running the car w/o the sensor connected so that the fans stay on all the time (yeah, I know... not good) and planning to replace the connector. I assume this is the best way to go (other than running the car with the connector off)?
