|
i used the wires listed on this guide, and everything hooked up well to my $30 sunpro tach II gauge. only 1 problem, the light on the gauge does NOT dim, is on full brightness whenever i turn the lights on (not a real issue tho)
the instructions from the sunpro tach say to use the blue/black wire.. 2 did nothing and the 3rd (that i found) gives some reading, but no where near the correct reading.
the Light blue/white wire did the trick Thanks again.
BTW, its a 94 B13 XE 2 Door with only minor engine mods
|
