|
ok there were a few things a 13 engine code but i know why that is cause the sensor is unplugged cause i have electric fans and the stay on while the engine is running but this other code and another thing is kind of weird.
34 Detonation Sensor circuit The detonation sensor circuit is open or shorted (abnormally high or low voltage is registered). Harness and connector
Detonation sensor
and i was reading "NOTE: Light indicates signal from sensor to ecu. ON=rich, Off=lean. Blinking light means system is constantly adjusting between lean and rich which is normal. Any other indication would be abnormal and require further investigation. The switched on/off is 'closed loop', while a constant on or off is 'open loop"
in the instructions and well when the engine is off but in the on position the light is on, and then when the engine is started the light is off but doesnt go back and forth so that means my engine is running lean, how do i fix these two problems?
|