|
Here's what I did that worked for me: 1) found the three letter/number strings on the kepyad controller, and yes, used the "F#" string that started with "S". Press CLR then all the numbers following the "S" (ignoring any letters). Then the long constant beep started. During the long beep, entered the new code (4-7 digits or so) and nothing else, the long beep continued a short bit, then a few short beeps. Locked the doors and shut them. Waited a minute to give the system a chance to adjust to the new code, then pressed CLR followed by the new code. Worked like a charm. Good luck.
|