Quote:
Originally Posted by greenbean699
I have put a e16 5-speed on a ga16i, which the ga16i and ga16de has the same block.
|
So it sounds like this should be fine
Things to check.
do the axles come out in the right place ? mount position ?
Guess you can use the GA axles, that gets the side to side correct.
also measure the distance from axle to the block with a ruler, if its same within half an inch I think it will be ok ( position to hub fore and aft)
on mounts I think you should look and see if the positions are the same and figure out if GA or original mounts should be used.
good luck.