|
search on google on how to bleed a clutch line.
basically you open up the bleeder on the slave cylinder, press in the pedal, close the line, remove the pedal.
you do this until there is a steady stream of fluid coming out (no air bubbles).
notes:
-keep the reservoir full of fluid so you don't introduce more air by running the level down.
-you can have the bleeder closed, pump a few times, keep the pedal down, then open and then close.
__________________
NA > TT Converted, OBDII > OBDI
AshSpec ECU, Stillen intake, Specialty Z complete 2.5" exhaust, Snow Performance water injection, Setrab oil cooler, Koyo radiator, Z1 intercoolers
SS brakelines, Eibach lowering springs, KYB adjustable shocks
HKS turbo timer, Greddy boost controller, Apex'i SAFC-II
JSPEC Front Bumper, Kazera KZ-A Michelin Pilot Sport
Philips HIDs 4300K
|