Quote:
|
Originally Posted by ValBoo
Here's how A'PEXi SAFC works:
You can have it set with two different metering maps:
example:
Map 1 which is applied at 35% wot or below
Map 2 which is applied at 75% wot or above
When you are in-between 35% and 75% wot the unit will proportionally interpolate settings between Map 1 and Map 2.
Hope this helps.
|
Marc, from what I've read on the Spec-V forums, we should just set the high map since the QR just reads on closed loops when not under aceleration or when the accelerator is not fully depressed. I just set the high map and have it kicking in at 35%.