View Single Post
Old Mar 9th, 2007, 07:45 PM   #5 (permalink)
Vandy-1
Nissan Enthusiast
 
Join Date: Apr 2006
Location: Arizona
Posts: 76
Quote:
Originally Posted by dappa1
3.2qt in a 2.4l?? to my knowledge the 1.6 in the sentra takes 3.2qt.. so how can the 2.4 be the same
Good question I agree it doesn't sound right however
the 2.4 motor calls for a 4.0 quart capacity to include the oil filter.
After having someone else change the oil on my 2000 GXE a few times and every
time it being overfilled by approx a quart, I have carefully measured and found that
3.2 qts is the perfect amount to not go over the full mark on the dipstick.
This is after draining out the old oil to the point it is dripping very slowly into a catch pan.
Also remember that some oil remains up in the valve areas and never drains out completely.
The motor is completely stock with factory oil pan and dipstick.
I read another post where a person found that 3.3 qts of oil was just right for his 2.4 Altima.

I also forgot to mention that in addition to the 3.2 quarts you need to add approx
another 1/8 quart for the oil filter capacity.
It cannot be 4.3 quarts as per the post below as the 4qts for the 2.4 is noting the
motor is COMPLETELY void of oil.

Last edited by Vandy-1 : Mar 9th, 2007 at 08:10 PM.
Vandy-1 is offline   Reply With Quote
Sponsored Links
Advertisement