NissanForums.com :: Nissan Forum - View Single Post

nigeleccleston · Nov 27th, 2006, 02:15 PM

I found your post useful. I notice you thought you did not have a screw to turn in your ECM. I thought that too, but finally discovered I needed to use a very small screwdriver to engage it - 2.0 mm. Also it was behind a plastic label I had to peel off.
I also tried the accelerator pedal method to no avail - I think this is for 2002 and newer.
The ECM on a 2000 Altima GXE is behind a plastic kick panel to the right of the accelerator. You can get the screwdriver in without removing or loosening the ECM.

Nov 27th, 2006, 02:15 PM	#11 (permalink)
nigeleccleston NissanForums Newbie Join Date: Nov 2006 Posts: 1	Use smaller screwdriver I found your post useful. I notice you thought you did not have a screw to turn in your ECM. I thought that too, but finally discovered I needed to use a very small screwdriver to engage it - 2.0 mm. Also it was behind a plastic label I had to peel off. I also tried the accelerator pedal method to no avail - I think this is for 2002 and newer. The ECM on a 2000 Altima GXE is behind a plastic kick panel to the right of the accelerator. You can get the screwdriver in without removing or loosening the ECM.