|
go to the parts store. order some E15 pistons. '83 MPG, if they get that detailed. should be the same.
there was also some chatter on here about using the GA16DE pistons AND RODS for a long-rod E16. this'll get you better dwell and lower peak piston speeds for better ignition and less piston side load.
ah. there's a pic you threw up already... that's the deal. just cut some valve reliefs. you should be able to have a shop mill them in, provided you know the diameter and depth. the dia you can measure, and the depth can be measured by a decent shop with a depth gauge, you'll just need to make a plot of piston height and valve lift (from head surface) vs crank angle and do some addition/subtraction.
blown, PM'd ya.
__________________
's like shootin' 'tards in a bucket.
|