Quote:
|
Originally Posted by camoy
Ok I got the new cable in and it is now possible to shift the car into gear much easier. But the car is still making a popping noise in reverse only. Happens even though the clutch is completely let out and only when i am giving it gas. It does not do it if the cluch is all the way out but it is already moving in reverse, but if I touch the gas to keep it going then the popping noise comes back. Thanks again.
|
I know this thread is old but if anyone else has this problem.....check the front motor mount first. This exact same problem happened to me after I installed my new clutch and cable(p.s. Use only the oem cable..it is way better than the aftermarket for adjustment and quality) The problem with my front motor mount was with the upper bolt on the dogbone mount. There is a plate with a nut that the bolt screws into. The plate MUST face toward the front of the vehicle and not down toward the bottom bolt. If it faces down, it will bang into the bottom bolt any time you give it some gas in Reverse. Actually sounds like the tranny is clunking around in the engine bay.