|
ok, I just got the motor in and fired it up and it doesnt idle, and when I give it some gas it misses quite a bit and runs super rich, the plugs foul after a few minutes, now it wont start, I looked over everything and it all looks plugged in and good, its a u12 bluebird ecu, u12 fuel rail, tps, distributor, coil, oem o2 sensor, and a maf from a s13, the motor itself checks out fine with compression and good cams, so i am thinking it might be the maf, does the oem maf for a usdm sr20de work with a u12 sr20det? I also found around 20 ohms resistance on the maf and found the main motor to chassis ground was loose, so I fixed that and then it had 5 ohms resistance, so I hooked up a jumper for the ground and it still ran bad, any help?
|