Harris

As the title says, I just installed the SE-R fans in my 240, and I have to say that fitment was perfect (no trimming required)! This is by far the cheapest route if you want to switch to electric fans.


Things needed for this project:

1) Two SE-R fans
2) Two long 12-gauge wires (one for power and one for ground).
3) Whole lot of zip-ties.
4) 30-amp inline fuse.
5) Toggle switch to manually control when the fans come on.



In the process of wiring the ground wire and power wire to the battery:






I took one of the plugs of the SE-R fans to power both of them, and then used that one unit to head towards the switch:





30-amp fuse to be on the safe side:





How I zip-tied the two fans together, and then zip-tied them to the radiator fill-neck. Also note that all hoses and wires above the fans were zip-tied together to clean up the area a bit:





The bottom of the fans, unattached. I didn't feel the need to fastem them down as I didn't notice them moving around. I will try to fasten the bottom down later anyway:





Another part of the fan zip-tied to the radiator:





The toggle switch that powers the fans. This is the best I could do with figuring out where to place the switch:





How the engine bay looks after closing it all up:

__________________
"The greatest trick the devil ever pulled was convincing the world he didn't exist".

-The Usual Suspects