|
The clutch pedal pushes a rod directly through the firewall and into the master cyl. Very much like the brake pedal goes directly to the brake master cyl. so look on the engine side of the firewall just on the other side of the clutch pedal. it may even use the brake fluid reservoir and just have a tube from brake to clutch master cyl to feed brake fluid. hydraulic clutches just use good old brake fluid, so they may share this common reservoir.
or just look in the owners manual for instructions on adding/checking the fluid level on the clutch, this will probably lead you right to it. it should look just like a smaller brake master cyl, and in effect, the two are exactly the same type of thing.
Good luck.
Johnny
|