|
I just put a new cd player in my 92SE. I notice the facory amp and wiring was a headach.!!
Ok this might be confusing!
If you want to use the factory amp (I wouldn't suggest it if your cd player is as nice as speedmonkey or anynew sterio). There is a amp out (blue-from your sterio) wire that need to be hooked up to your factory amp(it powers on the amp and can't remmember the color of wire - from the truck. sorry!). Once that is hooked up, and 2 front speakers are hooked up - all 4 speakers should be working. The factory amp takes 2 speakers in and powers up all 4 speakers - bad sound!!!
I hooked up the Amp and was not happy with the sound. I checked the speakers, they were fine!! so I disconnected the amp, Searched and found 2 wires that goes to the front speakers and for the rears - they are connected to the amp.. So I ran 2 new wires from the rear speakers to the sterio. Good sound!!
If you have any questions or confused, I will do my best!
|