Nissan Forum banner

350z Brembos on a 300zx??

13K views 4 replies 4 participants last post by  Old $chool 
#1 ·
I recently came across a set of 350z front Brembos calipers and was wondering if they will fit on a z32 TT as in direct bolt on, if not how can i make them fit??



thanks
 
#2 ·
damn good question. curious to know myself. I would think you would need the entire system for it to fit properly. You cant just add Z33 brembo calipers to Z33 that didn't come with brembos....so I would assume you couldn't either. Problem is (with the Z33), you need the calipers, rotors, lines, etc to swap them on a non-brembo Z33.

If all you have is the calipers, then i would say sell them on ebay and just do a stage 2 brake upgrade. Reason being is the remaining things you need to buy (if they fit) are not very cheap. I see alot of Z33 guys selling their brembos for a pretty penny....plus its USED. Stoptech offers a stage 2 brake kit for $600-700. comes with slotted or crossdrilled rotors, axxis or hawks pads, steel braided lines, and race brake fluid. This might be a better choice in the long run. and you'd be getting NEW parts. I'll dig around and see if I cant find an answer to your question though.
 
#4 · (Edited)
I recently came across a set of 350z front Brembos calipers and was wondering if they will fit on a z32 TT as in direct bolt on, if not how can i make them fit??

thanks
They will fit provided you have the adapter brackets for calipers the and you don't use 16" rims.

CZP 300ZX 12.75inch Upgrade Adapter Kit, w/ 350Z Track Rotors- Nissan Performance Parts

The GTR rotors are nice but you need the calipers to make the rotors fit but they fit the 16" rims that come stock on our Z32.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top